prodc

 

  

 

 

 

Cooling conveyor is designed to automate the process of cooling of glazed confectionery in the factories of the food industry.

The latest development of the company DITO group.

Description

•    Cooling conveyor is designed to automate the process of

cooling of glazed confectionery in the factories of the food industry.
•    The latest development of the company DITO group.
•     Not large size and a large refrigeration capacity gives the opportunity to work at a higher speed and capacity of up to 800 kg / h Coupling product.
•    The conveyor is driven by an electric motor and reduction gear; the inverter Omron is used for smooth changing of the speed;
•    The volume of supplied cooled air is regulated by remote control using a microprocessor (temperature output in the chamber; operating status of the unit; reasons of failures; assignment and control of desired temperature in the chamber; the automatic defrost settings and other parameters of the compressing/condensing unit);
•    Desired temperature inside the cooling chamber will be achieved due to the recirculation of cooled air;
•    Chilled products are transported by the conveyor to the working table designed for collection of the finished products.
•    Sectional cooling conveyor with 2 / 3 / 4 cooling zones, with a thermic chamber, is made of stainless steel ASI 304, the length of each section is 2500 mm.
•    The conveyor is equipped with drive station and tightening stations, as well as gear motors Motive Italy. Conveyor belt UNI Italy is available in blue or white color.
•    The remote control panel is equipped by frequency converter Mitsubishi. In this control panel there are buttons START, STOP, and the button of speed control. There are installed two digital controllers EVK 203, Italy, used for the refrigeration units with ventilated evaporators provided with automatic defrost function. Temperature sensor: PTC silicone.
•    Cooling unit EMBRACO ASPERA.
•    Air coolers by the ЕСО company, Italy.
•    Cooling agent: Freon DUPONT R 404A

Technical specifications

Length of the cooling zone of the tunnel, mm – 2500
Width Conveyor, mm – 1050
Height from the floor to the top of the conveyor belt, mm - 920 ± 30
Length of the table of the tunnel, mm - 800
Length of the output table of the tunnel, mm – 630
Temperature conditions, t   up to (-10) ᴼC    
Rated voltage, kW  380
Power,  kW  9
Conveyor belt speed, m/min 0 - 5,5
Cooling agent: freon 22 (hladon 4041) kg 1,6
Calculated productivity,  kg/h  400
Weight,  kg  620

Foto / Video

0117
0117
0118
0118
0119
0119
0115
0115

Download Dito Leaflet

 

 

ditgr
Яндекс.Метрика