SPRINKLING AND WATERING SYSTEM MIX 400

>

Description

System for sprinkling blanks with powdered sugar, sugar, salt, coconut, chocolate chips, sesame seeds and other seeds, as well as for watering blanks with sugar syrup, melange, chocolate syrup and other syrups. The conveyor can be built into the production line or work autonomously, the length of the conveyor is 1000 mm. The mesh conveyor is equipped with a top sprinkler.

The system of toothed shafts allows you to evenly dose different fractions without changing the geometry of the fraction (does not break, does not crush the fraction).

One form is baked from 5 to 12 seconds. These lines are made both on gas and on electricity.

Product Type:

ANY CONFECTIONERY

Advantages

- Mesh conveyor can be equipped with billets pouring system. The workpieces can be poured completely or partially, using a dispensing nozzle for filling with nozzles. Excess liquid passes through a sieve and falls into a storage container to collect residues. The circulation pump delivers from the storage tank to the watering tray from above. The system is completely autonomous, closed cycle. The control of metered watering is controlled by the pressure in the fluid supply system.

An additional option is heating the liquid in the storage tank.

- The mesh conveyor can be equipped with an air blowing system. This system allows you to distribute and remove excess moisture or crumbs from the product. The blowing power is regulated by an Omron frequency converter. The system includes a high pressure radial pump, a control station distribution of the wind flow (adjustment in height and angle of inclination of the diffuser).

​ - The mesh conveyor can be equipped with a system for returning the dressing fraction to the loading hopper after it enters the storage bin. The return of the fraction to the hopper is carried out by two augers (vertical and horizontal) by a motor-reducer, the speed is constant (unchanged).

​ - The mesh conveyor can be equipped with a system for sprinkling the bottom of the workpieces. This option allows you to apply powder fractions to the bottom of the blanks. Works together with the top dressing hopper.

WATCH VIDEO

MIX400

MIX400

Формы "Космонавтики"

Получить предложение

Получить консультацию

TOP
en_USEnglish
Яндекс.Метрика